10
11
ASSEMBLY INSTRUCTIONS
Install from above with suspension brackets
(attic accessible)
*ONLY IF UNABLE TO ATTACH DIRECTLY TO JOIST(S)
1. For joist spacing 16 in.- 24 in., insert suspension
bracket
2
into the bracket cover on the duct connector
side and the back of the fan body
1
.
Install the suspension brackets to the joists with long
wood screw, and secure the suspension brackets to
the fan body
1
by using the short screws (provided).
Hardware
A
Long wood screw
B
Short screw
2. Remove the fan junction box cover
a
. Using wire
nuts (not supplied), connect house wires to fan wires
b
as shown in the wiring diagram on page 5.
14AWG is the smallest conductor that shall be used for
branch-circuit wiring. Reattach fan junction box cover
c
.
3. Connect a 6 in. circular duct
a
(not supplied) and vent
to the outside. Secure it with duct tape (not supplied)
or clamp (not supplied) to make the connection secure
and air tight.
Suspension Bracket
Fan Body
1
2
16"(406mm)
19.2"(487mm)
24"(609mm)
2
c
b
a
c
b
a
a
Joist
Joist
1
2
3
