AX-8 Series User Manual BIOS
4-9
4
Automatic Booting When Power is Connected
Steps to enable or disable the automatic booting when power is connected are as described
below:
1.
Under the Chipset screen, select the
South Bridge
option as shown in Figure 4.1.4.4.
2.
Select
Restore AC Power Loss
and set either
Power On
or
Power Off
as shown in Figure
4.1.4.5.
When set as Power On, once power is supplied, it will boot directly without the need to press
the boot button.
When set as Power Off, once power is supplied, the boot button also needs to be pressed for it
to boot.
Figure 4.1.4.4
Содержание AX-8 Series
