Minimum rest time:
Set the rest time. If engine off time shorter than preset time, send alert
message.
Inflection point Completion angle:
Set the corner replenishment angle. When the device angle
changes bigger than the pre-set value, then report this data.
ACC off upload interval:
Set the upload interval after ACC off. When ACC off, the device upload
according to the pre-set time interval.
ACC on upload interval:
set the upload interval when ACC on, the device upload according to the
pre-set time interval
Revise Password:
Set the modification of login password.
6. Trouble shooting
If the device can’t be connected to the background server after first time installation, and the
background server shows it is offline, please check the installation correct or not.
If you have any questions for the operation, please refer to the following questions and
solutions; if you still can't solve the problem, please contact your dealer.
Common Problems
Reasons
Solutions
Poor signal
Test at areas where there are
high buildings or underground
parking lots, where radio
waves cannot be sent or
received normally.
Use it at a good signal place
platform shows device
not activated after first
installation
Main power supply connected
correct or not
Do not connect to the main control
line of the vehicle
SIM inserted not correct
Check the SIM card
LED status
Check if the indicator is blinking or
steady
SIM without GPRS activated or
SIM card out of charge.
Please contact carrier to activate
GPRS or charge
Platform map shows
incorrect location
GPS no location
Please go to outdoor place where
GPS signal good
Vehicle did not move after
installation
Please drive the vehicle on the
road
ACC connected or not
Connect the device and turn on
ACC
Platform shows the main
power disconnect
Poor power supply connection Check whether the power supply
line of the device connected
correct or not
Platform shows device
offline
SIM card out of charge of
GPRS was canceled
Please check your SIM card
Weak signal area
Please try again at good signal area
