Delta Amplon RT10K, Руководство пользователя

Страница: 12 / 36

8
Amplon RT Series
Rack Mounting
z
Use the included bracket ears and screws to mount the UPS in a rack by following the proce-
dures below.
1. Attach the included bracket ears to the lateral mounting holes of the UPS. See Figure 3-a .
2. Follow steps 1 to 4 to install the UPS in Delta’s rail kit (optional). See Figure 3-b .
Step
n
: Adjust the length of the rail according to the rack.
Step
Y
: Tighten the nuts.
Step
Z
: Fix the rail on the rack.
Step
[
: Insert the UPS in the rack and tighten the screws.
3. If you want to use a non-Delta rail kit, please only follow Step
[
.
NOTE:
If you need the optional rail kit, please contact your local dealer.
Tower Mounting
z
Use the included tower stands to mount the UPS in an upright tower position by following the
steps below.
1. Step
n
: Assemble the tower stands by inserting the tenons into the grooves according to
the size of the UPS. See Figure 3-c .
2. Step
Y
: Pull out the UPS control panel and rotate it 90° clockwise. See Figure 3-d .
3. Step
Z
: Carefully lift the UPS upright with the Delta logo shown on the control panel facing
up. See Figure 3-e.
4. Step
[
: Place the UPS inside the tower stands. See Figure 3-f .
NOTE: A minimum of two people are required to execute Step
Z
and Step
[
.
z
Leave adequate space (at least 15cm) around all sides of the UPS for good ventilation.
N
Chapter 3: Installation
(Figure 3-a) UPS Bracket Ear
Installation (Figure 3-b) Rack Mounting
1
2
4
3
3