10.0 Connecting a pendant float to the AlertMaxx unit
10
For technical support, please call 01279 757400
AlertMaxx
Figure 7. Wiring a pendant float switch
E
N
L
40
120
20
70
50
80
BLUE
BLACK
BROWN
BLUE
1. Using a draw cord, pull the float cable through the cable duct on the chamber.
2. Insert a large cable gland into the second from right hole of the AlertMaxx unit.
3. Pull the float cable through the large cable gland on the AlertMaxx unit.
4. Connect the black and a blue cable from the float switch cable to the terminal strip (see figure 7).
The brown cable should be disregarded and isolated.
PLEASE NOTE
If the cable supplied with the float switch is too short, the cable can be extended using a cable with a
minimum core cross sectional area of 1mm².
