11
AGC7648 Deep-Buffer Switch
3.2 Installing an Optional SFP+/QSFP/QSFP28 Transceiver
The SFP+ slots support the following optional transceivers and cables:
•
10GBASE-SR
•
10GBASE-LR
•
10GBASE AOC
•
10GBASE DAC
•
1GBase-SX
•
1GBase-LX
The QSFP28 slots support the following optional transceivers and cables:
•
100G Base-SR4
•
100G Base-LR4
•
100G AOC
•
100G DAC
•
40G Base-SR
•
40G Base-LR4
•
40G AOC
•
40G DAC
(Figure 3-4: Inserting an SFP+ Transceiver into a Slot)
(Figure 3-5: Inserting a QSFP28 or QSFP Transceiver into a Slot)
To install the SFP+, QSFP, or QSFP28 transceiver, follow these steps:
1. Consider network and cabling requirements to select an appropriate SFP+, QSFP, or
QSFP28 transceiver type.
2. Insert the transceiver with the optical connector facing outward and the slot connector
facing down. Note that SFP+, QSFP, or QSFP28 transceivers are keyed so they can only
be installed in one orientation.
3. Slide the SFP+, QSFP, or QSFP28 transceiver into the slot until it clicks into place.
NOTE:
•
SFP+, QSFP, or QSFP28 transceivers are hot-swappable. The switch does
not need to be powered off before installing or removing a transceiver.
However, always first disconnect the network cable before removing a
transceiver.
•
SFP+, QSFP, or QSFP28 transceivers are not provided in the switch
package.
