14- ENG
A09733
HOW TO CLEAN THE WATER
INLET FILTER
This screen filter should be checked
periodically and cleaned if necessary.
1. Remove filter
by
grasping end and
removing it from
water inlet of pump
as shown.
2. Clean filter
by flushing it with
water on both sides.
3. Re-insert filter
into water inlet
of pump.
NOTE:
Cone side faces
out.
NOTE:
Do not operate pressure
washer without filter properly installed.
Filter Screen
HOW TO REMOVE THE
WHEELS
1. Using a 1/8" hex
head wrench
loosen set screw
in hub collar.
2. Slide hub collar
from axle and
remove the tire.
