20
TIMER OFF
button
Ɣ
By pessing this button it is available to go to the TIMER OFF settting state with
the same setting method as that of the TIMER ON, in which case the TIMER
OFF symbol will blink.
TEMP button
Ɣ
By pressing this button it is allowed to select the temperature option, the indoor
setting temperature or the indoor ambient temperature. However, when there
is no any temperature symbol on the wireless control, the current temperature
option will be kept unchanged.
Ɣ
(Indoor setting temperature is default after the indoor unit is energized initially)
Ɣ
By pressing the TEMP button, when the temperature symbol is displayed, the
wireless control will show the indoor setting temperature; when is displayed,
it will show the indoor ambient temperature; when
is displayed, it will keep
the current temperature option.
TURBO button
Ɣ
In the Cool or Heat mode, pressing this button can activate or deactivate the
TURBO function. When the TURBO fucntion is activated, its symbol will be
displayed; when the running mode or the fan speed is changed, this function
will be canceled automatically.
SLEEP button
Ɣ
By pressing this button, Sleep On and Sleep Off can be selected. After powered
on, Sleep Off is defaulted. Once the unit is turned off, the Sleep function is
canceled. When Sleep is set to On, the symbol of SLEEP will display. In this
mode, the time of timer can be adjusted. Under the Fan and Auto modes, this
function is not available.
LIGHT button
Ɣ
Press this button to select LIGHT on or off. When the LIGHT is set to on, the
icon
will be displayed and the indicating LED in the display will light up.
When the LIGHT is set to off, the icon
will be displayed and the indicating
LED in the display will light off.
5.2.2 Introduction to Special Functions
Ɣ
About X-FAN function
This function indicates that the indoor fan will continue its operation for another 10 minutes after
the unit is turned off in order to dry the evaporator of the indoor unit.
ķ
Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor
fan will continue running for about 10 min. at low speed. In this period, press X-FAN button to stop
indoor fan directly.
ĸ
Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the
complete unit will be off directly.
Ɣ
About TURBO function
If the TURBO function is activated, the unit will run at high fan speed to perform cooling or
heating quickly so that the ambient temperature will approach the preset temperature as soon as
possible.
Ɣ
About After-Heat Elimination (This function is applicable to some special models)
When the air conditioner is turned off under the Heat or Auto mode, the compressor and outdoor
fan will stop running directly and the upper and lower guide board rotate to the horizontal position,
while the indoor fan will run for another 10 seconds at the low speed and then stop.
Ɣ
About LOCK
Press +and - buttons simultaneously to lock or unlock the keyboard. If the wireless controller is
locked, the icon
will be displayed on it, in which case, any press will get no response but with the
mark blinking for three times. If the keyboard is unlocked, the mark will disappear.
Ɣ
About SWING UP/DOWN
ķ
Press the Swing Up/Down button for more than 2 seconds and then the louvre will swing up and