12
temperature; otherwise the unit won’t run into the COOL mode.
2) In the DRY mode, will blink. The fan motor will run at the low speed among a certain
temperature range. The dehumidifying effect in this mode is better than that in the COOL mode and
the energy saving effect is also better.
3) In the FAN mode, will blink.
4) In the HEAT mode,
will blink. The set temperature should be higher than the room
temperature; Otherwise the unit won’t run into the HEAT mode.
7.8 Error Display
Fig. 7.8
When some error happens, the error code will be shown in the environmental temperature display
zone. Fig. 7.8 indicates that the compressor is under high pressure protection.
When some error happens, except the FAN mode under which the unit will still work normally, the
outdoor unit and fan will stop under the COOL, DRY and HEAT mode, but the LCD display will not be
affected.
When some error is displayed on the controller, please turn off the unit to stop and has it repaired
by the specialized personnel.