11
Attaching Fence Rails and Sliding
Extension Table
Figure 15
Loosely attach square head screws (4), flat washers (4),
and hex nuts (4) to the front edge of saw table and
extension wings. Square heads are to be to the front.
Figure 16
Slide front rail (A) over square head screws using channel
(B) on back side of rail. Extend right side of front rail 17 3/
4” past edge of right extension wing, then tighten all
screws.
Figure 17
Attach rear rail (A) in same manner as front rail. Extend
rear rail 12 1/2” past edge of right extension wing. Tighten
all screws.
Fig. 15
Fig. 16
Figure 18
With sliding extension table (A) flipped over, loosely
assemble adjusting brackets (B) and hardware as
indicated.
Fig. 18
Fig. 17
