10
Fig. 25
MAINTENANCE
After approximately 100 hours of use, the grease in the
gear housing should be checked and changed.
To gain access to the gear housing:
1.
DISCONNECT THE TOOL FROM THE POWER
SOURCE
.
2.
Turn the machine over and loosen the two screws (A)
Fig. 25, and remove the cover (B).
3.
Remove the old grease and repack the gears.
4.
Replace the cover.
PARTS, SERVICE OR WARRANTY ASSISTANCE
All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network
of Porter-Cable · Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional
information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the
location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).
Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which
in normal use has proven to be defective in workmanship or material, provided that the customer returns the product pre-
paid to a Delta factory service center or authorized service station with proof of purchase of the product within two years
and provides Delta with reasonable opportunity to verify the alleged defect by inspection. Delta may require that electric
motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta
will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration
made or specifically authorized by anyone other than an authorized Delta Service facility or representative. Under no cir-
cumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is
Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other war-
ranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.
Delta Building Trades and Home Shop Machinery
Two Year Limited Warranty
Printed in U.S.A.
A
B
ACCESSORIES
A complete line of accessories is available from your Delta Supplier, Porter-Cable
•
Delta Factory Service Centers, and
Delta Authorized Service Stations. Please visit our Web Site
www.deltamachinery.com
for a catalog or for the
name of your nearest supplier.
WARNING:
Since accessories, other than those offered by Delta, have not been tested with this product, use of
such accessories could be hazardous. For safest operation, use only Delta recommended accessories.
50-287
Mobile Base
50-780
Stand
31-781
Sanding Spindle Set
(1", 2" 3" rubber spindles
Drum plates, abrasive
sleeves and table inserts.)
31-782
3/4" Sanding Spindle Kit
31-783
1" Sanding Spindle Kit
31-784
1-1/2" Sanding Spindle Kit
31-785
2” Sanding Spindle Kit
31-786
3" Sanding Spindle Kit
Our abrasive sleeves come in 80, 120, and 150 grit, and can be ordered six to a package. Since these sleeves are too
numerous to list here, please refer to our catalog or your nearest supplier for more information.
