Delta 14-650, Инструкция по эксплуатации

Страница: 6 / 18

6
Fig. 6
Fig. 7
Fig. 8
ASSEMBLING TABLE
1. Assemble the table (A) Fig. 7, to the base using the
two M6 x 35mm flat head screws (B) and T-nuts (C).
Insert the two screws (B) into the two holes (D) in table
board (A). Place the two T-nuts (C) into the slots
provided in the bottom of the base and tighten the two
screws (B) into the two T-nuts (C) securely.
2. The table (A) Fig. 7, can be moved in or out by
loosening the two screws (B), and re-positioning the
table, and then tightening screws (B).
ASSEMBLING FENCE
AND HOLDDOWN
1. Locate handle assembly and remove screw (A) Fig. 8,
and spring (B) from handle (C). Seperate handle (C) from
stud (D). Do not lose spring (B).
2. Fig. 6, illustrates the hydraulic cylinder (B) assembled
to the machine. The hydraulic cylinder (B) keeps the
head in the up position.
B
A
B
C
D
C
A
B
D