1751 Hurd Drive ● Irving, Texas 75038 ● (972) 580-0200 ● (888) 580-0202 ● Fax (972) 580-0277
URL: www.thermal-edge.com ● Email:
SP-ENG-211-000-05 Rev 1.3
24
|
P a g e
Warranty Information
Thermal Edge products are warranted to be free of defects in workmanship , materials and components.
The warranty period applies from date of shipment for one year.
The above warranty applies when the equipment is operated under the following conditions:
Ambient temperature not in excess of performance rating in normal atmosphere or as stated on
product nameplate
Voltage variation no greater than ± 10% from nameplate rating
Frequency variation no greater than ± 3Hz from nameplate rating
Maximum cooling load no higher than air conditioner nameplate rating
Waiting five minutes before restarting air conditioner after intentional or accidental shutoff
Compliance to all other installation, maintenance and oper ating instructions, as supplied
Thermal Edge cannot assume responsibility for misapplication of its products or the erroneous selection of
an inappropriate product by a non-authorized Thermal Edge representative. Our applications engineers
will gladly assist in the selection of the proper product provided all required details of the application are
furnished.
Thermal Edge assumes no liability beyond the repair or replacement of its own product. This Warranty
does not cover:
Labor or reimbursement of labor for evaluation, removal, installation, repair, or cost of any
warranted part, except at the Thermal Edge factory in Dallas, Texas
Use of equipment for other than its designed purpose or operating conditions
Operation in harsh, oily, corrosive or other abnormal environmental conditions, without the proper
filtration, sealing, protective coatings and/or weather protection
Damage to hermetic system resulting from continuous operation with dirty or clogged air filters or
improper or negligent maintenance
Use of refrigerant other than designated
Customer modification or abuse
Shipping damage or other accident
Repair or service by unauthorized personnel.
Cracked or broken hermetic tubing or brazed joints caused by shipping damage or mishandling are not
covered under the Warranty. Claims for shipping damage are the responsibility of the Consignee. Timely
claims must be filed with the freight carrier.
The purchaser assumes the responsibility of grounding the unit and installing it in accordance with local
electrical and safety codes, as well as the 2008 National Electric Code (NEC) and OSHA.
THIS WARRANTY CONSTITUTES THE ENTIRE WARRANTY WITH RESPECT TO THE PRODUCT AN D
IS IN LIEU OF ALL OTHERS, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF
MERCHANTABILITY AND WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND IN NO
EVENT IS THERMAL EDGE RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY NATURE
WHATSOEVER.
