background image

                                                                                                      

 

4421 Tradition Trail ● Plano, Texas 75093 ● 972-964-2700 ● 800-836-7472 

URL:  

www.iscenclosurecooling.com

 ● Email:  

[email protected]

 

SP-ENG-211-D48-02 Rev 2.3          12 | 

P a g e

                                                                                   

 

 

Note:  

The Remote Controller option is required for high pressure wash-down applications. 

 
Corrosion Protection 
 
The copper tubing and aluminum fins used in the air conditioner refrigeration circuit are subject to 
damage in the presence of corrosive chemicals such as hydrogen sulfide, chlorine, etc.  Condenser 
and evaporator coils are available with electrostatically applied epoxy coating to prevent corrosion.  
Three options are available to protect the air conditioner from premature failure due to corrosion. 
 
 

A-Level Protection: 

 

 

Coated condenser coils. Included in NEMA Type 4X units. Available in NEMA Types 
12 and 4.  

 

B-

 Level Protection:

 

 

 

Coated condenser and evaporator coils. Available in NEMA Types 12, 4 and 4X. 

 

C-

 Level Protection:

 

 

 

Coated condenser and evaporator coils plus refrigeration tubing. All copper joints 
brazed with 45% silver solder, then cleaned and epoxy painted.  Available on NEMA 
Types 12, 4 and 4X units.  

Note

: C-Level Protection is strongly recommended for 4X 

applications requiring 316 stainless steel.

 

 
 
 
 
 

Содержание DI-01A-D48 Series



























Отзывы: