© 2005 Delta-T Devices Ltd
Page
4
Device:
v
SM200
Soil Type:
v
Mineral
3
HH2 Meter
Connect the SM200 to the HH2 meter.
Press
Esc
to turn the meter on, and if necessary
press again until the HH2 displays the start-up screen.
Set the meter to read from an SM200:
►
Press
Set
and scroll down to the
Device
option.
►
Press
Set
again and scroll down to select
SM200.
►
Press
Set
to confirm this choice.
Make sure the HH2 is correctly configured for your soil type:
►
At the start-up screen, press
Set
and scroll down to the
Soil Type
option.
►
Press
Set
again and scroll down to the appropriate soil type (use
Mineral
for sand, silt or clay soils or
Organic
for peaty
soils)
►
Press
Set
to confirm this choice.
Choose the units you want for displaying readings.
►
At the start-up screen, press
Set
and scroll down to the
Display
option.
►
Press
Set
again and scroll down to select units.
►
Press
Set
to confirm this choice.
Press
Read
to take a reading.
Press
Store
to save or
Esc
to discard the reading.
Remove the SM200 from the soil and move to a new location...
If you have saved data, connect your HH2 to a PC and run
HH2Read
to retrieve the readings.
SM200 Store
?
20.3%vol
