DRFF-520SS
Precision
S
cr
ew
Feeder
Check contents
Contents listed above
Turn top gate screw in clock-
wise direction until gate is
fully open
Turn side gate screw in clock-
wise direction until gate is
fully open
Slightly loosen the rail fixing
screw in counter-clockwise
direction
Guide rail assembly out of
the feeder
Measure the diameter of the
screw to be used
3 mm screw used for demo
Slightly loosen screw shown
in counter-clockwise direc-
tion
Turn rail assembly over
Slightly loosen screws shown
in counter-clockwise direc-
tion
Remove screw found at rear
of rail assembly
Remove pre-installed spacer
shims
Choose the correct combina-
tion of spacer shims accord-
ing to screw diameter
Used 3.2 mm for demo
1
2
3
4
5
6
7
8
9
10
11
12
Setup instructions
Follow these step by step instructions to setup the DRFF-520SS according to the screw’s thread diam-
eter and screw’s head height.
DRFF-520SS Precision Screw Feeder
AC Power Adapter
Hex Wrench (2 mm)
Measurement Shim (1x 2.0 / 1.5 / 1.2 / 1.0 / 0.8 mm)
Spacer Shim (10x 0.5 mm/ 2x 0.2 mm)
3x 0.5mm / 1x 0.2 mm pre-installed
Large Stopper (Use with M2.0 mm - M5.0 mm)
Small Stopper pre-installed
Grounding Cable
DRFF-520SS Precision Screw Feeder
Adjustment Tool
Delta
Regis
Tools,
Inc.
Phone:
(772)
465-4302
7370
Commercial
Circle
Fax:
(772)
465-4368
Fort
Pierce,
Florida
34951
Email:
USA
www.deltaregis.com
2
