Delta Regis Tools Inc.
7370 Commercial Circle
Fort Pierce, FL 34951
www.deltaregis.com
6
•
Always use within the capacity range of the Spring Balancer.
•
Always adjust the spiral spring tension before using the Spring Balancer.
•
Do not pull down the cable over its maximum weight.
•
Cable should only be pulled straight down.
•
Do not use more than two tools for one unit Spring Balancer.
1-3 Maintenance and Inspection
•
Be sure to inspect the Spring Balancer on a regular basis.
•
Stop using, if there is abrasion or damage on Cable or Hook.
•
Never alter or disassemble the Spring Balancer.
•
There is a coil spring in the body of Spring Balancer. If disassembled, the sudden expansion of
the coil spring can cause personal injury.
•
If you need your Spring Balancer repaired, contact your sales agency or Delta Regis Tools Inc.
directly
1-4 Disposal
•
Contact your disposal dealer, in case of disuse Spring Balancer. There is a sudden expansion of
the coil spring then the balancer is disassembled which can cause injury or damage to property
2. USAGE
A Spring Balancer is a device which suspends a tool above the work area helping to balance the
weight of the tool.
3. CHECK THE CONTENTS OF THE PACKAGE
When you pick the new balancer out from the box, you should check the contents and the
condition such as breakages or oil leakages during transportation. You may refer the contents to the
part list of manual. If you have any problem with our Spring Balancer, contact your sales agency or
Delta Regis Tools Inc. directly.
4. INSTALLATION
4-1 Spring Balancer Installation (Figure-I)
•
You should install the Spring Balancer that has proper strength and strong fitting link for its
capacity range. Anchor should hold at least 10 times of the strength of the Spring Balancer’s
maximum capacity.
•
The fitting link must be closed so that it does not fall when even spring balancer is moved.
•
Make sure that there is enough slack in assist wire rope or secondary chain, so that the spring
balancer it is able to move freely.
•
Do not fix the main hanger of spring balancer. Main Hanger should be able to swivel freely.
!
CAUTION
!
WARNING
!
WARNING
!
WARNING
