BESL3 Series 120VAC Direct Plug-In Screwdrivers
Operation Manual
www.deltaregis.com
Page 6
1. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified
personnel could result in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of electric shock or injury, and may invalidate all warranties.
3. Check for damaged parts. Before further use, any part that is damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage,
and other conditions that may affect the tools’ operation. A part that is damaged should be properly repaired or replaced by
an authorized service center. Do not use the tool if the switch does not turn it ON or OFF.
4. Screwdrivers should be maintained in top running condition and used no more than 8 hours per day. To avoid motor
overheating, do not drive more than 10-15 screws per minute.
5. Inspect cables for signs of wear and have them replaced if suspect. Using an ohmmeter, verify ground continuity from the tip
of the screwdriver bit holder to the ground pin connection on the power cable.
6. It is recommended that the screwdriver be serviced annually. If the screwdriver is used more than 8 hours per day, service
should be performed more frequently.
7. Do not remove any labels. Replace labels which have been damaged.
Repairs to Delta Regis AC Direct Plug-In Series Screwdrivers must be performed by trained personnel, knowledgeable and
qualified in the repair of electric screwdrivers. Consult your nearest Delta Regis authorized service center.
Use only genuine Delta Regis parts when servicing these products. Do not attempt to modify the tools.
It is the responsibility of the employer to inform all operators of the information in this manual.
Service
Delta Regis AC Direct Plug-In Brushless Screwdrivers are warranted for one year from the date of purchase against defects in
material and workmanship. The brushless motor contained in our screwdriver is warranted for 3 years. This warranty does not
cover damage due to transportation, abuse, misuse, or improper service. Our sole remedy is to repair or replace (at our discretion)
any unit found to be defective due to defects in material or workmanship. It is the responsibility of the user to return any product
thought to be defective, freight prepaid, to our warehouse for inspection and evaluation.
There is no warranty of merchantability or fitness of purpose. In no event will Delta Regis Tools, Inc.
be liable for business interruptions, loss of profits, harm, injury, damage, personal injury, cost of delay,
or any other special, indirect, incidental, or consequential losses, costs, or damages.
Warranty
If you require parts or accessories for your Delta Regis product, please refer to our website or contact us for further information.
Parts and Accessories
