Delta-Opti CST-706, Руководство пользователя

Страница: 13 / 61

Page.8.
can check if the new setting IP address is occupied.
2.3.21 PING test
PING is the most conventional network debugging tools. It is used for testing if the connected IP
camera or other network equipment’s ethernet port is working normally and the IP address is correct.
2.3.22 POE tester
It can test the PoE voltage when the POE switch is supplying the POE power to IP camera. It can
clearly display the power+ and power- on the ethernet cable pins, each cable pin’s voltage and the
failure connection of cable pin series numbers.
2.3.23 Digital multimeter (optional function refer to the last page)
CCTV Tester built in highly stable and reliable 33/4 digit (6600) digital multimeter. It is used for the
DC and AC voltage measurement , AC and DC current measurement , Resistance measurement,
Continuity test, Diode measurements, Capacitance measurement, Auto/Manual measuring range
switching, relative value measurement and locking . It is easy operation and professionally accurate.
2.3.24 Visualfault locator(optional function refer to the last page)
Visual Fault Locator with 650nm wavelength can emit red laser sources to test multi-mode and single
mode fiber’s bending and breakage, andContinuous light-emitting and 1HZ, 2Hz modulating
lightoutput.It is indispensable tool in fiber project constructing, fiber net-work maintaining,
opticalcomponent manufacture and research.
2.3.25 Optical Power Meter (optional function refer to the last page)
The New tester adopts the most advanced handheld instrument specific integrated chip, achieve
ultra-low power operation, with the 7 inch LCD High-definition screen display
，
five wavelength
calibration points 1625nm
、
1550nm
、
1490nm
、
1310nm
、
1300nm
、
850nm.Linear or nonlinear
optical power display, it can measure the optical power value, and also be used for Relative
measurement of optical fiber link loss. It is necessary tool for fibre-optic communication, cable