Delta OHM HD37AB1347, Руководство пользователя

Страница: 12 / 68

- - 12
3.1.2 Immediate printing of data
By pressing Enter , you can print the current data on the HD40.1 printer.
Example of an immediate printout obtained using the HD40.1 printer
NOTES
========================
Model HD37AB1347
Instrument model
Indoor Air Quality
========================
Firm.Ver.=01.00
Instrument firmware version
Firm.Date=2010/01/15
Instrument firmware date
SN=12345678
Instrument serial number
User ID=0000000000000000
Identification Code
------------------------
Probe Ch.1 description
Description of the probe connected to input 1
Type: CO2-C0 Fw.V0R0
Data cal.:2010/01/15
Serial N.:10010060
------------------------
Probe Ch.2 description
Description of the probe connected to input 2
Type: Hot wire
Data cal.:2010/01/15
Serial N.: 10010100
========================
Date=2010/01/15 15:00:00
Date and time
CO2 850 ppm
Carbon Dioxide
C0 0 ppm
Carbon Monoxide
RH 29.2 %
Relative Humidity
T1 22.7 °C
Temperature detected at input 1
Patm 1010 hPa
Atmospheric Pressure
Va 0.00 m/s
Wind Speed
T2 22.0 °C
Temperature detected at input 2
FVa 0.0 l/s
Flow Rate
DP 3.8 °C
Dew Point
AH 5.9 g/m3
Absolute Humidity
MR 5.0 g/kg
Mixing Ratio
TW 12.8 °C
Wet Bulb Temperature
H 35.5 kJ/kg
Enthalpy
========================
3.1.3 The maximum, minimum and average values of the captured quantities
By pressing the ◄ /FUNC key you can display the maximum, minimum and average values of the
measured quantities.
To reset the statistical data press the
◄ /FUNC key until the “Reset? Yes No” message appears.
Select Yes using the ▲▼ keys, and confirm with ENTER.
NOTE : Once selected, for example max , all displayed quantities indicate the maximum value. The
average is calculated on the first five minutes of samples, and then on the current average.