Delta OHM HD21AB, Руководство пользователя

Страница: 49 / 51

- - 49
11. ORDERING CODES
HD21AB IAQ Monitor datalogger kit. It measures CO, CO
2
and atmospheric pressure. Complete with:
DeltaLog10 software ( version 0.1.5.3 and later ) for data download, monitor, and data
processing on Personal Computer, 4 x 1.2V NiMH rechargeable batteries, operating manual,
case.
The cables must be ordered separately.
HD21AB17
IAQ Monitor datalogger kit. It measures CO, CO
2
, atmospheric pressure, temperature and
relative humidity. Complete with: DeltaLog10 software ( version 0.1.5.3 and later ) for data
download, monitor, and data processing on Personal Computer, 4 x 1.2V NiMH rechargeable
batteries, operating manual, case.
The cables must be ordered separately.
11.1 A
CCESSORIES
SWD10 Stabilized power supply at 100-240Vac/12Vdc-1A mains voltage.
CP23 Connection cable with male mini-USB connector on instrument’s side and USB 2.0 male
connector on PC’s side.
BAT-40 Spare batteries with built-in temperature sensor.
11.1.1 Accessories for CO and CO
2
sensors
MINICAN.12A Nitrogen bottle for CO and CO
2
sensor calibration at 0ppm. Volume 12 liters. With adjustment
valve.
MINICAN.12A1 Nitrogen bottle for CO and CO
2
sensor calibration at 0ppm. Volume 12 liters. Without
adjustment valve.
ECO-SURE-2E CO CO spare sensor.
HD37.36 Kit connection tube between instrument and MINICAN.12A for CO calibration.
HD37.37 Kit connection tube between instrument and MINICAN.12A for CO
2
calibration.
11.1.2 Accessories for humidity sensor
HD75 Saturated solution at 75.4%RH@20°C for calibration of relative humidity probes, ring M24x1.5
and M14x1.
HD33 Saturated solution at 33.0%RH@20°C for calibration of relative humidity probes, ring M24x1.5
and M14x1.
P5 Protection grid in stainless steel for Ø 14mm probes.
P6 Complete protection in 20
μ
sintered AISI 316 for Ø 14mm probes.
P7 Complete protection in 10 μ sintered PTFE for Ø 14mm probes.
P8 Protection grid in stainless steel and Pocan for Ø 14mm probes, thread M12x1.
The Delta Ohm Metrological Laboratories are accredited by SIT in regards to Temperature,
Humidity, Pressure, Photometry/Radiometry, Acoustics and Wind Speed. On request, the
probes can be supplied with calibration certificate.