14.0 Connecting an AlertMaxx2 or Rego1 (if purchased)
PLEASE NOTE
The AlertMaxx2 must have the pump/s wired into it. The AlertMaxx2 must be installed in series to
the PowerMaxx2, this means the AlertMaxx2 must be installed in between the PowerMaxx2 & the
pump/s as per figure 5 on page 12.
The PowerMaxx2 can be connected to an AlertMaxx2 or Rego1. Battery backup capacity and condition are fed
directly to the SideWinder Tech software when connected to the internet.
The PowerMaxx2 is supplied with 3m of 4 core MaxxConnect family cable.
15.0 MaxxConnect cabling
The units are to be a maximum of 20m cable distance apart. MaxxConnect family cable can be purchased per
10m (DMS-288).
Do not join cables. Run full lengths only.
Figure 4. Wiring diagram
4.
3.
2.
1.
5.
Mamba GW Wiring Label - [MGWW-LB-V3-06.17].pdf 1 07/06/2017 16:19
11
