13
HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88
E-MAIL SUPPORT [email protected]
Model Number: GT-WKe-01UK
Faults and Rectification
Conformity Declaration
The conformity of the product with the legally prescribed standards is guaranteed. The full
conformity declaration can be found on the Internet at
www.gt-support.de
.
Fault
Possible causes and rectification
No function.
- Mains plug in the socket?
- Kettle placed correctly on the base?
- Has the dry-run protection activated?
(see page 11).
Two signal tones sound when the button
is pressed.
- Function not possible, e.g. if you intend to
heat the water to 60 °C, but the water is
already at this temperature (e.g. from a
previous boiling process).
Boiling process taking very long.
- Correct temperature set?
- The kettle must be descaled, see page 12.
When pouring, only a small amount of
water is coming out of the spout.
- Check whether the sieve is dirty inside
and clean it, if necessary, see page 12.
Stains are forming on the base of the inside
of the kettle.
- These are limescale deposits. These are
not harmful, but must be removed on a
regular basis, see page 12.
The kettle does not switch off, although
the water is boiling.
- Switch the kettle off and allow it to cool.
Check whether the lid is closed and
locked in.
Risk of scalding from hot
water vapour!
The temperature cannot be set during
boiling/keeping warm.
- The water temperature in the kettle is
probably still higher than the temperature
that you intend to set. Allow the water to
continue cooling in the kettle and select a
higher temperature.
Содержание GT-WKe-01
Страница 15: ......