NOTE:
The Outdoor PoE Extender must be grounded using
a ground wire between the
ground screw and earth
ground.
IMPORTANT:
Ground screw
* Make sure the grouning
resistance is lower than
0.5
Outdoor 2-Port GbE PoE Extender
Out 1
Out 2
PoE In
56VDC
24VDC
ON
OFF
PoE
1
2
2
1
2
1
2
Port:
To disconnect a LAN cable, loosen the cable
gland and pull the cable against the socket
wall towards the side of the locking tab.
PoE Output Port
Application
IMPORTANT -
please follow the procedures below carefully to ensure the best seal:
2. Thread the Cat5e/6 cable through the cap(A) & grip(B)
5. Thread the Cat5e/6 cable through the body(D)
6. Fit the washer(E) to the Outdoor PoE Extender connector
Extender
8. Hold Outdoor PoE Extender and then screw the body(D) onto the Outdoor
9. Push rubber(C) in the grip(B) and screw the cap tighten firmly. The
Cat5e/6 cable is sealed when the rubber(C) & grip(B) bulges to the edge
of the cap(A).
PoE Input Port Connector Assembly
Washer (E)
Body (D)
Rubber (C)
Grip (B)
Cap (A)
Rubber (C)
Rubber (C)
Split
100m
100m
90W bt PoE Injector
PoE Extender
PoE Extender
PoE
100m
PoE
PoE
100m
PoE
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|
+886- 2-82455282
|
F
+886-2-82455532
|
E
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|
T
:
408-773-8686
|
F
:
408-773-8298
|
VIVOTEK Europe
Zandsteen 15, 2132 MZ Hoofddorp Delta Electronics
T:+31 (0)20 800 3817 E:[email protected]
:
:
E:
T:
Copyright © 2022 VIVOTEK INC. All rights reserved.
