Part no. :
Delta model no. : HEC1200PB
Page 5
Warning:
1.
Installation work and electrical wiring must be done by qualified person(s) in accordance with all
applicable codes, standards and national wiring
regulations.
2.
Use this unit only in the manner intended by the manufacturer. If you have questions, please contact the
manufacturer.
3.
Install the air conditioner in accordance with the instructions in this installation manual. Improper
installation may result in water leakage, electric shocks or fire.
4.
Make sure that all wiring is secured, the specified wires are used, and there is no strain on the terminal
connections or wires.
5.
If refrigerant gas leaks during installation, ventilate the area immediately. Do not directly touch refrigerant
that has leaked from refrigerant pipes or other areas, as there is a danger of frostbite.
6.
Before serving or cleaning unit, switch power off and disconnect power supply.
7.
When cutting or drilling into wall or ceiling, do not damage electrical wiring or hidden utilities.
8.
Be sure to use only the specified accessories and parts for installation work.
9.
Protective earth connection: The enclosure must be earthed at the protective earth terminal. Use 2.5
mm
2
(14 AWG) wire and use spring washer to avoid loosening.
10.
The air conditioner shall be not accessible to the general public.
11.
The installation must contain a device to disconnect all poles of the air conditioner from the power supply.
The contact distance in all poles must be 3 mm minimum.
12.
To reduce the risk of electrical shock. Means for disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules.
13.
This appliance is intended to be used by expert or trained users in shops, in light industry and on farms,
or for commercial use by lay persons”
.
Caution
:
1. Install the air conditioner on a wall/ door strong enough to withstand the weight of the unit.
2. Do not block air inlets or exits.
3. Do not install the air conditioner at any place where there is a danger or flammable gas leakage.
4. Arrange the drain to ensure complete drainage.
