12
AGC7646V1 Aggregation Switch
3. Align the hooks on the switch and the holes in the inner rail, and then slide the inner rail
backward until it is locked into place.
NOTE:
Repeat the similar steps to install another inner rail.
(Figure 3-3: Installing the Inner Rail on the Switch)
4. Push the middle rail back into the outer rail. Then repeat the similar step to assemble
another middle rail into the outer rail.
5. Making sure the L-shaped of the rear bracket is facing inward, align and push the rail firmly
into the rear rack until it clicks into place. Then pull the latch of the front bracket and align
the hooks with the front rack holes. Release the latch to lock the hooks into place.
NOTE:
Repeat the similar steps to install another outer rail.
(Figure 3-4: Installing the Outer Rail to the Rack)