DELTA DORE TYXIA 253, Руководство пользователя

Страница: 76 / 88

EN
- 76 -
Associating raise/lower receivers
On the TYXIA 253, press and
release the Select. button to select
a raise/lower group (1 to 9 or
).
Example: group 2.
Example with a TYXIA 443
On each receiver that you want to
associate with the group 2, simulta-
neously press the
and
buttons until the LEDs flash.
Release.
On the TYXIA 253, press one of the
or , buttons, the symbols
become steady.
Check that the LEDs of each
receiver are no longer flashing.
Starting up
Power supply
Use a flat screwdriver to snap
off
➊ and remove the cover
➋ .
Remove the battery tab ➌ ,
then put back the cover.
Entering the association mode
Press the Select. button until the
display flashes (approx. 5 sec.).
If you want to select another group
(1 to 9 or
), press and release
the Select. button.
1
3
2
5 s.
Select.
Note: If no button is pressed within 2 minutes, the
TYXIA 253 automatically exits the association
mode.
To associate a TYXIA 710 receiver,
refer to its guide.
   