EN
21
20
9/ Troubleshooting
• The red LED fl ashes
several times every time
a button is pressed.
The battery is low.
Change the battery.
• Remove an association
- Remove the front face of
the remote control.
- Press button A.
The red LED fl ashes.
- Press
as many times as
required to select the motor
(receiver) to remove.
- Press the
button.
The shutter starts.
- Press button A to exit.
CR 2430
• Remove all associations
- Remove the front face of the remote control.
- Press button A.
The red LED fl ashes.
- Press the
and
buttons at the same time and
hold for 3 seconds.
- Press button A to exit.
• The receiver locks in off mode.
When an overload is detected, the product locks in
off mode for 30 seconds before authorising a new
activation. The LED fl ashes rapidly throughout this
phase.
Contact our customer service. (see document
«Important Product Information»).
An additional user guide is available on the
TYXIA 5731 page of the DELTA DORE
website. www.deltadore.com
