EN
20
21
11/ Favourite positions
You can save up to 2 favourite positions:
and
.
❶
❷
Set the shutter to the required position.
❸
Press
and
for 3 seconds to save the position.
The shutter will be activated briefly to confirm the association.
Release.
Repeat the operations for the 2nd favourite position.
> 3s
12/ Association with an alarm control unit
Association of the motor with an alarm control unit enables:
- the anti-intruder function (attempt to lift up the shutter), which is only possible
with the Radio Performance DxRP2 and xRP2 motors, non-compatible with the
Efficacité RE2 radio motors.
- the surveillance stop/start report, compatible with all motors.
12.1 Associating Performance DxRP2 or xRP2 radio motor
>5s
Bip
ON OFF
>5s
Bip
ON
Bip
> 3s
x 2
Set the alarm control unit to Maintenance mode, then to “Add product” mode.
❶
Set the alarm control unit to “Add product” mode.
❷
Associate the intruder mode with the alarm control unit
Press button B on the front
panel of the remote control
twice
, until the LED flashes
orange.
Then, press and hold the
button for ~3 seconds until the
motor is activated briefly.
The alarm control unit will beep.
The alarm control unit will beep.
The roller shutter will be briefly
activated twice.
For intruder detection to work, the lower stop must be recorded
automatically with locks.
Intruder surveillance is only active if the alarm is activated and the shutter
closed.
❸
Exit Add product mode and Maintenance mode
Briefly press the OFF button.
The LED changes from red to green to confirm the action.
The alarm control unit’s led flashes a beep.
Press the OFF button once again.
The LED changes from red to green to confirm the action.
The alarm control unit beeps twice and its LED switches off.
OFF
OFF
Bip...Bip
Содержание TYMOOV 10RE2
Страница 1: ...EN Wireless Tubular Motor range TYMOOV radio xRP2 DxRP2 xRE2 ...
Страница 16: ...www deltadore com 05 21 ...
