Association with TYBOX 157
The receiver light will be flashing, ready to be paired to the TYBOX 157. (if it is not flashing, press and
hold the button for 3 seconds until L2 starts to flash.
On the TYBOX 157 turn the dial to the power symbol, press the “i” button for 5 seconds until you
enter the advanced menu. The
n press the “R” button once to enter the association mode. Ensure
the r-
01 Menu is set to “0”
Press the “OK” button once
to bring up the rAd1 menu
, then the “i”
button to begin the association.
The LED Light on the receiver will stop flashing and products will be associated. Turn the dial
clockwise to exit the advanced menu.