Association with TYBOX 5101
Ensure the receiver is in the correct mode (X3D) then press and hold the button for 3 seconds, so
that the LED light is flashing.
On the TYBOX 5101 press and hold the mode and “+” buttons together for 3 seconds to bring up the
“rf00” menu. Press the “+” button once so that the “00” is flashing.
Once the receiver has been associated, the “00” will change to “01” and the LED light on the receiver
will go out. The products are now associated.
Association with TYBOX 157
Ensure the receiver is in the correct mode (X2D) then press and hold the button for 3 seconds, so
that the LED light is flashing.
On the TYBOX 157 turn the dial to the power symbol, press the “i” button for 5 seconds until you
enter the advanced menu. Then press the “R” button once to enter the association mode. Ensure
the r-01 Menu is set to “0”
Press the “OK” button once to bring up the rAd1 menu, then the “i” button to begin the association.
The LED Light on the receiver will stop flashing and products will be associated. Turn the dial
clockwise to exit the advanced menu.
