Delta Controls eZV-440 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 69

background image

eZV-440 Version 2.1 Application Guide

Page 4 of 67

Document Edition 2.5

About the eZV-440

The eZV-440 and eZVP-440 controllers are native BACnet controllers with an integrated airflow
sensor and damper actuator for VAV applications, including multi-stage reheat with analog,
binary or floating control, and series or parallel fan boxes. The controller is also designed to be
compatible with Delta Controls’ eZNS and DNS-24L network sensors.

The eZV-440 controller comes pre-loaded with an algorithm which you configure to your site’s
needs using a configuration graphic. There are 2 types of eZV-440 controllers: both the
configurable (eZV) and programmable (eZVP) models use the configuration graphic for set up
but only the programmable controller allows you to create more complex control sequences
with General Control Language (GCL) programming.

About This Guide

This application guide introduces the controller and describes the differences between the
configurable and programmable models. The guide also explains how to use the configuration
graphic in ORCAview 3.40 R3 and higher to set up your eZV-440 controller. The product name
eZV-440 in this guide refers to both the configurable and programmable models unless stated
otherwise.

The configuration graphic version referenced in this guide is B-169041.1.

For help about the eZV-440 configuration page in enteliWEB 4.1 and higher, go to the online help
in enteliWEB. enteliWEB users require the applicable object permissions to change the settings
on the configuration page.

The installation guide for the eZV-440 can be found on the eZV-440
product web page on the Delta Controls Support web site
support.deltacontrols.com.

Upgrading From Older Firmware Versions

Go to the enteliZONE V340 R2.1.0 Release Notes on the Delta Controls Support web site for
more information.

«
...
4
5
6
7
8
...
»

Содержание eZV-440






































































Отзывы:

Нет отзывов

Похожие инструкции для eZV-440

Бренд: Microchip Technology Страницы: 37

Бренд: Caen Страницы: 20

EtherNetIP ControlPlex CPC12EN

Бренд: E-T-A Страницы: 28

Бренд: H3C Страницы: 69

Бренд: IDK Страницы: 96

Бренд: LANGER EMV-Technik Страницы: 48

Бренд: Samson Страницы: 8

Бренд: Samson Страницы: 60

Бренд: Samson Страницы: 40

Бренд: Full Gauge Controls Страницы: 3

Бренд: Ban Seok Страницы: 9

Бренд: Purmo Страницы: 2

Бренд: salmson Страницы: 78

Бренд: D+H Страницы: 16

Бренд: Daikin Страницы: 8

Бренд: Silverline Страницы: 16

Бренд: SAFERA Страницы: 32

Бренд: HAOZEE Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды