background image

Warranty:

 

 

This Delta product is warranted to be free from defects for a period 

of 90 days from the date of purchase under normal use.  This warranty extends 

only to the original retail purchaser and is valid only when supplied with proof of 

purchase, or if received as a gift, when the registration is on file with Delta.

Please do not return this item to the store before contacting 

us about missing parts or with any questions.

Customer Service:

Web Site: www.deltachildrensproducts.com

Delta Children’s Products

114 West 26th Street

New York, NY 10001 

Tele.212-645-9033

To register your product for important safety alerts and updates to 

your product please visit 

http://deltaenterprise.com/register.asp

In the event that you need to contact our customer service 

department please have the Style Number and Lot Number available.  

To report a problem, please log on to 

www.deltachildrensproducts.com 

and click the Customer Service 

Tab, or log on to 

www.deltaenterprise.com/customer_service.asp

or contact us by phone at (212) 645-9033.

Use the space below to make note of those numbers.  They can be 

found on the label on the back of the product.
Style No.:______________________
Lot No. : _______________________
Pack Date:_____________________
Date of Purchase: _____________ 

(you should also keep your receipt)

Содержание 70816-607













Отзывы: