10
Customer Service Tel. (646) 435-8726
www.DeltaChildren.com
1
Car Seat Adapter -
Correct Placement
Car Seat Adapter Clicks And Locks
On Both Sides Of The Stroller Frame
When In A Fully Locked Position
Front
Back
Insert On
Both Sides
Fig. 1C
Fig. 1D
Fig. 1E:
Attaching Chicco Car Seats - Keyfit 30™:
BEFORE YOU START:
Lock the rear wheels (Fig. 1). Remove child bar
(Fig. 1A). Install Car Seat Adapter Clips --
see pg. 8 for full instructions
(Fig. 1B).
ATTACHING CAR SEAT:
Attach the car seat adapter to the
stroller frame (Fig. 1C) until it clicks into a fully locked position (Fig. 1D).
Place car seat into car seat adapter until it “CLICKS” into a fully locked
position. Chicco car seats “CLICK” and lock on both sides of the adapter
when in a fully locked position (Fig. 1E). Make sure car seat is fully
fastened by pulling upward.
®
Attaching Car Seat Adapter:
Securing Car Seat With Velcro Straps:
ATTACHING CHICCO CAR SEATS
®
Chicco Keyfit 30™
®
Fig. 1F
Chicco Car Seat Side Locking Tabs
Lock Under This Area On The Adapter
Locking Tabs
Located On Both
Sides Of Car Seat
Securing Car Seat With Velcro Straps-
Final step to secure the footrest side of car seat onto stroller, use the straps
with velcro to secure seat onto stroller. (Fig. 1F). Check that car seat is
securely attached by pulling up on the car seat. To remove, undo latches and
unlock car seat from adapter.
Removing Car Seat -
To remove, squeeze release handle at back of infant
restraint and lift upward out of adapter.
Car Seat In A Fully
Locked Position
Car Seat Locking
Tabs Lock On Both
Sides When In A Fully
Locked Position
BEFORE YOU START
Fig. 1A
Fig. 1
Fig. 1B
LOCK REAR WHEELS
LOCK REAR WHEELS
Release
button
REMOVE CHILD BAR
REMOVE CHILD BAR
(See pg. 8)
INSTALL
INSTALL
CLIPS
CLIPS
