Delsys Tringo, Руководство пользователя

Страница: 21 / 42

21
Trigno Control Utility Software
The Trigno Control Utility software operates on a PC
independently from EMGworks Data Acquisition and Analysis
software. The Trigno Control Utility is designed to configure and
control the Trigno System so that it becomes a full analog
instrument. In this scenario, all data acquisition is performed by
sampling the analog channels with 3rd party acquisition systems,
often used with Motion Capture Systems.
Additionally, the Trigno Control Utility serves to provide digital
samples if using the Trigno SDK.
Installing the Software
The Trigno Control Utility software is included on the Delsys
Software DVD. Installing EMGworks will also install the Trigno
Control Utility software.
The Trigno Control Utility software can also be obtained by
downloading the EMGworks installer from the Delsys web site at:
http://www.delsys.com/Products/EMGworks.html
There is no license required to use the Trigno Control Utility.
The system requirements for the Trigno Control Utility software is
the same as EMGworks, detailed in the EMGworks User’s Guide:
http://www.delsys.com/KnowledgeCenter/NetHelp
Launching the Software
When installed, the Trigno Control Utility software may be
launched from the Start menu under “Delsys, Inc.” To create a
desktop shortcut to the Trigno Control Utility, navigate to the
program in the Start menu, right click the icon, and select “Send
To --> Desktop (create shortcut)”.
The Trigno Control Utility application must remain running on
the PC for the analog outputs to remain active.
The wireless sensor configuration window is accessible from the
“configure” button. “Start” and “Stop” controls activate and
deactivate the analog outputs, and define the Start and Stop output
trigger events. All settings are locked once the “Start” button is
depressed, and can only be changed after the “Stop” button is
pressed