Connection Systems
Delphi Connections Systems
Page 8 of 9
11/19/99
Note:
Assembly Instructions are provided for
reference
only, and are intended for use by skilled assembly technicians.
Personal injury, failure of the system to work as intended, and damage to the product may result from failure to follow the
assembly and disassembly techniques and/or use of tools other than those described. Always follow Assembly
Instructions thoroughly, and please contact Delphi Connection Systems for further assistance.
ASSEMBLY INSTRUCTIONS
280 GT SIDE LOCK COVER
CONNECTOR ASSEMBLY
NOTE 1
: COMPONENTS SHOULD COME AS AN ASSEMBLY
NOTE 2
: SLC MUST NOT BE LOCKED INTO PLACE PRIOR TO PLUGGING LEADS
PLUG LEADS TO CONNECTOR ASSEMBLY PER PRINT.
STEP 1:
COMPLETED
STEP 2
AFTER ALL LEADS ARE BUILT,
SEAT SIDE LOCK COVER (SLC).
APPLY PRESSURE WITH FINGERS
UNTIL SLC SLIDES INTO LOCK
POSITION.
STEP 2:
SLC
PRE-STAGED
SLC
SEATED
