Delos DS10-1V, Руководство по эксплуатации

Страница: 5 / 12

1
.
Operation Instr uctions
4
、
Enter coordinate
Preset a value to current position for a designated axis
in normal display state; Press [SET] key to input state ;
then press data key, Input data value;
5
、
Linearity Compensation
Press [SET], then [MM/INCH], which indicates the step
is to Linear Compensation, then Input the Linear
Compensation value . Compensate the linear error to
make display value equals to standard value;
The calculation of compensation rectifying coefficient:
(Measurement I Standard value) x 1000.000
Coefficient^
Standard value Example for X axis:
Measurement 200.020mm Standard value 200.000mm
Rectifying coefficient
= ( 200.020-200 ) * 1000
/200 =-0.01 mm/m
6
、
1/2 Function
Set the center of work piece as datum by halving the
displayed value. Press [SET], then Press
[1/2], in turn
to value the axis display value , The position is
the work-piece's center.
7
、
Toggle Between R/D Display Mode
Press[SET]
，
then press [R/D]
，
Display the data will be
radius and diameter of processing mode, A D/R LED will
be appear of the right; Light indicator is the diameter;
Otherwise, is the radius
。
3