17
BURNERS
These parts can be removed and cleaned with appropriate products.
After cleaning, the burners and their flame spreaders must be well dried and correctly
replaced.
It is very important to check that the burner flame spreader and the cap have been correctly
positioned. Failure to do so can cause serious problems with correct combustion and may
cause irreversible damage to the hob surface.
Check that the electrode/s “
S
” (figs. 3.1, 3.3, 3.4, 3.5) next to each burner is/are always
clean to ensure trouble-free sparking.
Check that the probe/s “
T
” (figs. 3.1, 3.3, 3.4, 3.5) next to each burner is/are always clean
to ensure correct operation of the safety valves.
Both the probe and ignition plug must be very carefully cleaned.
Note: To avoid damage to the electric ignition do not use it when the burners are not
in place.
CORRECT REPLACEMENT OF THE AUXILIARY, SEMI-RAPID AND RAPID
BURNER (depending on your model, your cooktop may only have some of
these burners - see pages 8, 9)
It is very important to check that the burner flame distributor “
F
” and the cap “
C
” have been
correctly positioned (see figs. 3.1, 3.2) - failure to do so can cause serious problems.
CORRECT REPLACEMENT OF THE TRIPLE-RING COMPACT, TRIPLE-RING
AND DUAL BURNER (depending on your model, your cooktop may only
have some of these burners - see pages 8, 9)
The burner must be correctly positioned; failure to do so can cause serious problems with
correct combustion and may cause irreversible damage to the hob surface.
Fit the flame spreader to the housing as shown by the arrows (see figs. 3.3, 3.4, 3.5).
The burner correctly positioned must not rotate (fig. 3.6).
Then position the cap “
A
” and the ring “
B
” (figs. 3.6, 3.7).
