DèLonghi PrimaDonna Avant ESAM 6700 EX2, Инструкция по эксплуатации

Страница: 16 / 26

14
set by default to automatically deliver 30 ml of
“my coffee”. To modify these settings, proceed
as follows:
1. Place a cup under the coffee spouts ( fig.
13).
2. Press the icon repeatedly (fig. 8) until
“MY COFFEE” is displayed.
3. Press and hold the icon until “Program
Quantity” is displayed, then release. The
appliance starts delivering coffee and the
icon flashes;
4. As soon as the coffee in the cup reaches the
required level, press the icon again.
The quantity set has now been programmed.
Programming the long “my coffee” quantity
The appliance is set by default to automatically
deliver about 100ml of LONG coffee.
To modify this quantity, proceed as follows:
1. Place a cup under the coffee spouts ( fig.
18).
2. Press the icon repeatedly (fig. 8)
until “MY COFFEE” is displayed.
3. Press the LONG icon (fig. 10) until “Program
Quantity” is displayed, then release. The
appliance starts delivering coffee and the
LONG icon flashes;
4. As soon as the coffee in the cup reaches the
required level, press the LONG icon again.
The quantity set has now been programmed.
Regulating the coffee mill
The coffee mill is set by default to prepare coffee
correctly and should not require regulating
initially.
However, if after making the first few coffees you
find that delivery is either too fast or too slow (a
drop at a time), this can be corrected by adjusting
the grinding adjustment knob (fig. 11).
Please note!
The grinding adjustment knob must only be
turned when the coffee mill is in operation.
For fuller bodied creamier
coffee, turn one click
anticlockwise towards “1”
(finer ground coffee).
For faster delivery (not a
drop at a time), turn one
click clockwise towards “7”
(coarser ground coffee).
These adjustments will only be evident after
at least 2 cups of coffee have been delivered.
If delivery is still too fast or too slow, repeat
the correction, turning the knob another click.
Tips for a hotter coffee:
For a hotter coffee, you are recommended to:
UÊ «iÀvœÀ“Ê >Ê Àˆ˜ÃiÊ VÞViÊ LivœÀiÊ `iˆÛiÀˆ˜}Ê
the coffee: press the icon to select
the “Rinsing...” function (a flashing arrow
appears alongside the selected message on
the display) and confirm by pressing the OK
icon. Hot water is delivered from the spout,
heating the internal circuits and making the
coffee delivered hotter;
UÊ i˜>LiÊÌ iÊVÕ«ÊÜ>À“iÀÊ>˜`ʏi>ÛiÊÌ iÊVÕ«ÃÊ̜Ê
warm;
UÊ Ü>À“Ê Ì iÊ VÕ«ÃÊ LÞÊ Àˆ˜Ãˆ˜}Ê Ì i“Ê ÜˆÌ Ê œÌÊ
water (using the hot water function);
UÊ ÃiÌÊ Ì iÊ º ˆ} »Ê VœvviiÊ Ìi“«iÀ>ÌÕÀiÊ ˆ˜Ê Ì iÊ
menu ( OOOO ).
Danger of burns!
During rinsing, a little hot water comes out of
the coffee spouts and is collected in the drip tray
underneath.
Avoid contact with splashes of water.
Preparing espresso coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans
as they could stick to the coffee mill and make it
unusable.
1. Fill the container with coffee beans (fig. 12).
2. Place under the coffee spouts:
- 1 cup, if you want 1 coffee (fig. 13);
- 2 cups, if you want 2 coffees (fig. 14);
3. Lower the spouts as near as possible to the
cup. This makes a creamier coffee (fig. 15).
4. Press the icon corresponding to the number
of coffees required (1 cup or 2 cups
) (fig. 9 and 16).
5. Preparation begins. The amount of coffee
and taste selected are displayed together
with a progress bar which gradually fills as
preparation progresses (fig. 17).