8
OPERATING FROM THE CONTROL PANEL
TURNING THE APPLIANCE ON/OFF
Before plugging the appliance check the caps on back of
the unit are correctly inserted on drainage hose A10.
Plug the appliance into electrical receptacle. Two lines appear on
the display indicating that the appliance is in stand-by and the
buttons and
light on.
Touch button (C1) to switch the appliance on.
When turned on, the air conditioner starts operating in the same
mode as when it was turned off.
Note:
If you don’t switch on the appliance, after a few minutes, the
and
buttons switch off and the display fades to reduce en-
ergy consuption.
To turn off the appliance, touch the
button, then unplug
the appliance.
Note:
Never switch off the appliance by unplugging it: always
use the button, wait a few minutes and then unplug. Doing
so, the appliance will run a check of the operating conditions.
REAL FEEL FUNCTION
REAL FEEL is the innovative De’Longhi technology that works
simultaneously on temperature reduction and humidity control,
securing best comfort level.
With traditional systems, during working time, optimal comfort
conditions may be reached but not secured over time. With REAL
FEEL, once optimal comfort is reached, PAC automatically modu-
lates compressor action and fan speed, to keep it over time.
To activate the function, touch
button.
Perfect!
Perfect!
REAL FEEL light (C9) changes color when approaching the best
comfort level (see following diagram).
HIGH
°C/°F
%
LOW
LOW
HIGH
Perfect!
Perfect!
• The well-being feeling is a subjective condition: for this
reason, different people may judge differently the same
environmental conditions.
• In particularly severe environmental conditions (large size
of the environment, high temperature or humidity outside,
poor insulation of the room, too many of people or strong
heat load in the room, strong exposure to the sun ...) this
device may not be able to reach the best comfort level.
AIR CONDITIONING MODE
Ideal for hot muggy weather when you need to cool and dehu-
midify the room. To set this mode:
• Touch repeatedly the
MODE
button until the conditioning
symbol is displayed: the display shows the desired
temperature.
• Press
+
(C4) or
-
(C5) buttons to adjust the desired tem-
perature.
• Select the fan speed by pressing the
button (C6).
You can choose:
ORANGE LIGHT
: Room conditions far
from optimal level.
GREEN LIGHT
: Most people feel good
room conditions, near optimal level.
BLUE LIGHT:
Best comfort level.
HU
MIDIT
Y
TEMPERATURE
HIGH
MEDIUM
LOW
HIGH
MEDIU
M
LO
W
Operating curve
