DèLonghi DTC 95 E, Руководство по эксплуатации для пользователя

Страница: 16 / 40

Do not use the glass surface for
storage.
16
SAFETY HINTS:
– Before you switch the hob on, make
sure you know which knob controls
the required cooking plate. We advise
you to set the pan over the cooking
plate before switching it on. Remove
the pan after you have switched the
cooking plate off.
– Do not use pots and pans with rough
bases (pay attention to cookware
made of cast-iron). Rough bases can
damage (scratch) the glass surface of
the hob. Make sure that the bottom of
the pan is dry and clean.
– Pots with aluminium bottoms may
leave silver streaks or spots on the hob.
– Do not leave wet or damp lids on the
hob.
– The glass-ceramic surface and pans
must be clean. Carefully remove any
food debris (especially containing
sugar), dirt etc. with the aid of a
cleansing agent.
– Pan handles should never stand out
beyond the kitchen worktop, as there
is a great danger of knocking the pan
over.
This will also ensure that children
cannot reach them.
– Do not use the hob if the glass
surface is broken or cracked in
any way. Please disconnect the
cooker from the mains and con-
tact the after-sales service.
– Do not lean over the cooking plate
when in use.
– Do not lay cooking foil or plastic mate-
rials on the ceramic surface when it is
hot.
– Remember that the surface remains hot
for a long time (about 30 min.) after the
cooking plate has been switched off.
– Follow the cleaning instructions carefully.
CLEANING THE HOB
Before you begin cleaning make
sure that the appliance is switched
off.
Remove spillages and other types of
incrustations.
Dust or food particles can be removed
with a damp cloth.
If you use a detergent, please make sure
that it is not abrasive or scouring.
Abrasive or scouring powders can dam-
age the glass surface of the hob.
All traces of the cleaner must be removed
with a damp cloth.
Do not put articles on the hob which can
melt: i.e plastic, aluminium foil, sugar,
sugar syrup mixtures etc.
If any of these products items have melt-
ed on the ceramic surface, you should
remove it immediately (when the surface
is still hot) by using a scraper to avoid any
permanent damage to the surface of the
hob. (Available under part No. 103138).
Avoid using a knife or other sharp utensils
since these can damage the ceramic.
Do not use steel wool or an abrasive
sponge which could scratch the surface
permanently.
ATTENTION: MOST IMPORTANT!
If cleaning the glass ceramic hob
using a special scraper tool take
extra care to avoid damaging the
seal at the edges of the glass ceramic
surface.
Fig. 4.8