DèLonghi D906GWF Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 44

DèLonghi D906GWF Скачать руководство пользователя страница 20

20

CHOICE OF BURNER

Burners

Pan diameter

Auxiliary

12 - 14 cm

Semi-rapid

16 - 24 cm

Triple ring

26 - 28 cm

Fish-burner

from 12x30 to 18x40 cm

Wok

max 36 cm

The burner must be chosen according to the diameter of the pans and energy
required.

For optimum efficiency uso a wok or pan no smaller than 230mm diameter.

Saucepans with handles which are excessively heavy, in relationship to the weight
of the pan, are safer as they are less likely to tip.
Pans which are positioned centrally on burners are more stable than those which
are offset.
It is far safer to position the pan handles in such a way that they cannot be
accidentally knocked.

When deep fat frying fill the pan only one third full of oil.

DO NOT

cover the pan with a lid and

DO NOT

leave the pan unattended.

In the unfortunate event of a fire, leave the pan where it is and turn off all
controls.
Place a damp cloth or correct fitting lid over the pan to smother the flames.

DO NOT

use water on the fire.

Leave the pan to cool for at least 30 minutes.

Figure 22

do not use pans with concave or convex bases

«
...
18
19
20
21
22
...
»

Содержание D906GWF













































Отзывы:

Нет отзывов