•
Two position carpet/floor brush
Pos. 1: to clean hard floors, bristles out ( ) (fig. 4).
Pos. 2: to clean carpets and rugs, bristles in ( ) (fig. 5).
Select the position of the bristles using the lever on the brush.
USING THE CLEANING TOOLS
10
ASSEMBLY INSTRUCTIONS
Always unplug from the mains before attaching or removing tools.
Fitting tools
Attach the hose to the coupling on the appliance, pressing the two levers at the sides and
pushing it in as far as it will go (fig. 1).
To remove the hose, press on the two levers at the sides and pull the hose out.
Vacuum tubes
Connect the telescopic extension tube to the end of the hose handgrip.
Once the telescopic tube has been attached to the handgrip, rotate the black plastic ring on the
telescopic tube towards the left and pull out the tube (Fig. 2). To fix it at the required length, rotate
the black plastic ring towards the right. Then fit the chosen nozzle to the other end of the tube.
For versions without telescopic tube, join the two tubes (fig. 3), connect them to the hose handgrip
and attach the required tool to the opposite end.
N.B: All vacuuming tools can be connected either directly to the hose handgrip or to the rigid
tube.
• Crevice tool (fig. 6)
to clean radiators, corners, edges,
drawers, etc.
• Brush tool (fig. 8)
Fitted with a joint to facilitate cleaning.
Particularly suitable for removing dust from
fabric, furniture, books, curtains, frames and
clothing.
• Multipurpose nozzle for upholstered fur-
niture (fig. 7)
To clean upholstered furniture, mattresses,
garments, car seats etc. For curtains, set
the power to minimum.
• Shoulder strap (fig. 9)
Ideal for cleaning stairs, attach to the rings
(
X
).
