4
1. LOCATION
Place heater on the floor beneath the coldest window in the room, or any other location. Your heater will reduce the effect
of cold drafts.
The heater should not be placed immediately below a power outlet.
Do not use this radiator in rooms with a floor area of less than 4 m
2
(43 sq. ft. ).
2. CONNECTION
The radiator should be connected to a properly polarized A/C 110/120 V household outlet in perfect working condition.
Keep loose clothing or bedding, furniture and flammable material away from the heater’s wall outlet.
3. TURNING ON
Insert the plug into an electrical outlet, rotate the thermostat knob (if provided) to maximum and turn the unit on as fol-
lows using the power selector:
• Turn the power selector to position
1
to select minimum output (the light on the left will come on).
• Turn the power selector to position
2
to select medium output (the light on the right will come on).
• Turn the power selector to position
3
to select maximum output (the lights will come on).
4. ADJUSTING THE THERMOSTAT
When the room has reached the desired temperature, turn the thermostat knob slowly in an clockwise direction until you
get to the setting – and not beyond it. The thermostat will then adjust the set temperature automatically and keep it con-
stant.
If your unit is a three-output version, in intermediate seasons or on days when temperatures are not particularly cold,
select minimum output to optimize savings and consumption.
ANTIFREEZE FUNCTION
Turn the thermostat dial to the position and the power selector to position
3
. The appliance will maintain a minimum
room temperature of approximately 5°C (42°F), thus preventing freezing while conserving energy. In models that come
with a timer, tabs must be set in the inward position.
REMINDER
To completely shut the appliance off, turn the power selector to the
OFF
position and then unplug the appliance from the
main.
5. UNITS WITH TIMER
Clock setting
The program/timer, as with all clocks, must be set to the correct time. If for example the time is 9:30 a.m. (day zone),
rotate the dial clockwise (following the direction of the arrow) until 9:30 is aligned with the triangular pointer.
IMPORTANT:
DO NOT ROTATE CLOCK DIAL COUNTER-CLOCKWISE.
The timer is in effect an electric clock, and will only work when plugged into a power supply.
When unplugged, the timer stops and must be later re-set.
Your product is equipped with a 3-pole alternating current line plug (grounded). There is only one way it can be plugged
into a power supply. This is a safety feature. If you are unable to insert the plug fully into the outlet, try again by turning
it the other way. If it still does not go in, it is probably due to an obsolete outlet that should be replaced.
