13
AIR CONDITIONING WITH INSTALLATION
• Fit the air exhaust hose (B2) in the relevant housing located
on the rear side of the appliance (fig. 1).
• Drill a hole 150 mm in an outside wall or through a window
panel. Respect the distances, dimensions and heigh of the
hole given in figure 8.
ø 150mm
in the
window
panel
in the wooden
kickboard of a
French window
in the wall: you are
recommended to in-
sulate the section of
wall using suitable
insulation.
• Fit the wall flange (B1) into the hole.
• Fit the air exahaust hose (B2) into the wall flange (B1) (Fig.
9)
• When the hose (B2) is not connected, the drilled hole can
be closed with the flange cap (B1).
Please note:
As special tools are required for installation, we
suggest you have the appliance installed by specialized person-
nel.
• When installing the air conditioner, you should leave a door
slightly open little as 1 cm to guarantee correct ventilation
and room pressure.
• Keep the air hose as short and free of curves as possible to
avoid constrictions.
OPERATING FROM THE CONTROL PANEL
C1
C2
C4
C11
C13
C19
C20
C9
C7
C5
C6
C3
C16
C14
C12
C10
C15
C17
C8
C18
DESCRIPTION OF THE CONTROL PANEL (C)
C1
ON/STAND-BY (on/off) key
C2
Function selection key MODE (air conditioning, dehumidi-
fying, fan, ON-OFF Wi-Fi - reset WLAN settings)
C3
Decrease key
C4
Increase key
C5
Temperature indicator
C6
Timer indicator
C7
Timer symbol
C8
Air conditioning symbol
C9
Dehumidifying symbol
C10
Fan symbol
C11
ECO REAL FEEL indicator
C12
SILENT symbol
C13
Auto indicator
C14
Air flow indicators
C15
Alarm symbol
C16
ECO REAL FEEL symbol
C17
Set temperature values, programmed on/off time
C18
App Indicator
C19
App timer/calendar
C20
Wi-Fi symbol
