10
Using the remote control unit
(some models only)
MODELS WITH REMOTE CONTROL
•
Point the remote control at the receiver on
the air conditioner. The remote control
must be no more than 16,4 ft (5 metres)
away from the appliance (without obsta-
cles between the remote control and the
receiver).
•
The remote control must be handled with
extreme care
. Do not drop it or expose it
to direct sunlight or sources of heat.
DESCRIPTION OF THE REMOTE CONTROL
22) "ON/OFF"
button
23)
Increase /Decrease button for temper-
ature/programmed use
24) "MODE"
button
25) "TIMER"
button
26)
Fan speed selection button
(MAX/MED/MIN).
27)
°F/°C scale button
Inserting or replacing the batteries
•
Remove the cover on the rear of the
remote control;
•
Remove the old batteries, if present.
•
Correctly insert two new L03 “AAA” 1,5V
batteries (see the instructions inside the
battery compartment);
•
Replace the cover.
TURNING THE APPLIANCE ON
Plug the appliance into the mains.
Press the
ON/OFF
button (
22
) (when turned on, the air conditioner starts operating in the same
mode as when it was turned off).
Press the
MODE
button (
24
) to select the required mode
COOLING
DEHUMIDIFYING
FAN ONLY
On the control panel, the light corresponding to the selected mode comes on.
For air conditioning/dehumidifying/fan only settings and programming the timer, see page 8-9.
MAX 16,4 ft
MAX 5 metres
If the remote control unit is replaced or discarded, the batteries must be removed and dis-
posed of in accordance with current legislation as they are harmful to the environment. Do not
mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nick-
el-cadmium) batteries. Do not dispose of batteries in fire. Batteries may explode or leak.
22
23
25
27
26
24