5
The instructions below will enable you to prepare your air conditioner for operation as efficiently
as possible.
Before use, make sure the air intake and outlet grilles are unobstructed.
AIR-CONDITIONING WITHOUT INSTALLATION
Just a few simple steps and your comfort is
ensured with your air conditioner:
•
Fit the air exhaust hose
in the housing
at the back of the appliance.
Insert it as shown in figure
A
.
8
13
For optimum results:
•
If you have a sash window, place the
bracket
on the window sill, extend the
bracket fully within the window frame, fix the
bracket by using the pin then lower the win-
dow onto the bracket. Insert the window
outlet
of the exhaust hose
into the
slot, then connect the hose to the air condi-
tioner (fig.
B
).
13
14
17
I
NSTALLING YOUR PORTABLE
AIR-CONDITIONER
Keep the air hoses as short and free of
curves as possible to avoid constrictions
ELECTRICAL CONNECTIONS
Before plugging the appliance into the mains socket, check that:
•
The mains power supply corresponds to the value indicated on the rating plate on the back of the appliance;
•
The mains socket and electrical circuit are adequate for the appliance;
•
The mains socket matches the plug. If this is not the case, have the plug replaced;
•
The mains socket is adequately earthed.
Failure to follow these important safety instructions absolves the manufacturer of all liability.
The power cable must be replaced by a qualified professional only.
B
Thanks to the locking pins, it’s possible to
use the window bracket also for sliding
windows. Position the hole of the bracket
so to allow a correct installation of the
exhaust hose (see figure
C
).
A
1
2
D
C
•
If you have a double window, use the
sucker provided to hold the two parts of
the window together (fig.
D
).
Содержание PAC A120E
Страница 2: ......
