7
OPERATING INSTRUCTIONS
To correctly learn how to use the machine, when starting it for the
first time, carefully follow the step-by-step instructions described in
the following paragraphs.
4 PREPARING THE COFFEE MAKER
4.1 FILLING THE WATER TANK
•
Remove the water tank (Fig.1), rinse it and fill it with fresh water, without
exceeding the MAX line. When removing the tank, the milk frother must
always be positioned towards the centre of the machine, otherwise the
tank cannot be removed.
•
Replace the tank,
pushing it all the way in.
4.2 FILLING THE CONTAINER WITH COFFEE BEANS
•
Open the lid on the coffee bean container (Fig.2).
•
Fill the container with coffee beans.
•
Close the lid.
WARNING:To avoid malfunctions, never introduce ground cof-
fee, freeze-dried coffee or caramelised beans, or other objects
that may damage the machine.
4.3 USING THE COFFEE MAKER FOR THE FIRST TIME
1. Check that the water tank is full and that power cable is plugged into the
power outlet.
2. Move the milk frother towards the outside and place a cup underneath
(Fig.3).Then turn the machine on by pressing the button (Fig.4).
3.
IMMEDIATELY AFTER, WITHIN A MAXIMUM OF 30 SECONDS,
turn the steam knob anticlockwise until it stops (Fig.5) (it is normal for the
machine to make some noise).
4. After few seconds, a little water will come out of the milk frother. When
there is around 30cc in the cup, turn the steam knob half a turn clockwise
(Fig.6) until it stops, so as to stop the water coming out.
5. Wait for the and lights to stop flashing and stay on. (When the
lights are flashing it means that the machine is pre-heating, while when they
are on steady it means that the machine has reached the ideal temperature
for making coffee - par. 11 - points 1 and 2).
A few moments before the lights stop flashing the machine automatically performs
a rinse cycle: a little hot water will come out of the delivery spouts and will be col-
lected in the drip tray underneath.
Tip: for a hotter, short coffee (less than 60 cc), , first fill the cup with the hot rin-
sing water.Then leave it inside for a few seconds (before emptying it) so as to
pre-heat the cup.
6. At this point, the machine is ready for use.
Fig.1
Fig.2
Fig.3
Fig.4
