DeLonghi MAGNIFICA START ECAM22 2 Series, Инструкция по эксплуатации

Страница: 17 / 24

17
27
28
B
A
B
A
4. Position an empty container of at least 2 litres capacity
under the coffee spout (A15) and under the cappuccino
maker (A17) (fig. 29).
29
2 L
5. - Press the button to start the descale cycle.
6. After a few seconds, the Led relative to the will flash
rapidly to indicate that the steam/hot water dial (A19)
should be turned to the
I position (fig. 13).
7. For ten minutes or so, the machine alternates automat-
ically between pausing and delivering liquid from the
steam/hot water spout and the coffee spout.
When the first step of the descaling cycle has been completed,
the low water level indicator (B10) will light up.
Step 2: First rinse
8. Empty the container used to collect the descaler solution.
Remove and empty the water tank, rinse under running
water, then fill with fresh water up to the MAX level (fig.
30) and reposition in the machine; reposition the contain-
er under the spouts;
30
B
A
9. Press the button (which blinks rapidly) to start the
rinse: the medium intensity Led blinks to indicate that
step 2 of the descale cycle is in progress;
10. The machine proceeds automatically with the rinse: the
Led relative to steam blinks rapidly indicating that
the steam/hot water dial (A19) must be turned to the 0
position (fig. 1);
11. After ten seconds or so, when the Led relative to
steam flashes rapidly, turn the steam/hot water dial to
the
I position (fig. 14): the rinse fluid will flow from the
coffee and steam/hot water spouts;
When the second step of the descaling cycle has been complet-
ed, the low water level indicator (B10) will light up.
Step 3: Second rinse
12. Empty the container used to collect the water from the
first rinse. Remove and empty the water tank, then fill
with fresh water up to the MAX level (fig. 30) and rein-
state the softener filter, if in use; return the tank to the
machine and reposition the container under the spouts;
13. Press the button (which blinks rapidly) to start the
rinse: the strong intensity Led blinks to indicate that step
3 of the descale cycle is in progress; the rinse fluid will
flow from the steam/hot water spout;
Step 4: Completion of descale
procedure
14. When the Led relative to the pre-ground function lights
up, the descale cycle has been correctly terminated: the
Led relative to
steam flashes to indicate that the
steam dial must be turned to the 0 position.
15. The indicators of the grounds container (B12) and low
water level(B10) light up. Empty the grounds container
and the drip tray, in which part of the rinse water will
have been collected; finally, refill the water tank.
16. Reposition all components in the machine.
The machine is ready for use.