1. LOCATION
Place the heater on the floor beneath the coldest window in the room, or any other location. Your
heater will reduce the effect of cold drafts. The heater should not be placed immediately below a
power outlet. Do not use this radiator in rooms with a floor area of less than 43 square feet (4 sq.
m.).
2. CONNECTION
The radiator should be connected to a properly polarized household outlet in perfect working con-
dition. Keep loose clothing or bedding, furniture and flammable material away from the heater’s
wall outlet.
3. TURNING ON
Turn the thermostat clockwise to its maximum position. Push down both switches. (The switch lights
stay on independently of the thermostat cycling). When room reaches the desired temperature, turn
the thermostat knob counter-clockwise very slowly and carefully until you hear a click. This should
set your heater to maintain the current temperature by cycling on and off as required.
4. USE OF THERMOSTAT
The thermostat operates according to room air temperature, rather than radiator temperature.
Turning it counter-clockwise to smaller numbers would decrease the temperature; clockwise to
greater numbers would increase the temperature.
Antifreeze function
Turn the thermostat dial to the position and push both switches on. The appliance will maintain
a minimum room temperature of approximately 5°C, thus preventing freezing while conserving
energy.
REMINDER
To completely shut the heater off, ON/OFF both switches must be set in the OFF position.
5. COMFORTEMP FUNCTION
With both switches on and the COMFORTEMP button depressed
the appliance is automatically set to reach and maintain the sug-
gested & preset ideal energy-saving temperature. When opera-
ting in COMFORTEMP mode, the half-circle green pilot light is on.
To quit the COMFORTEMP function and return to manual opera-
tion, depress the COMFORTEMP button once again.
A safety device
A
safety device
switches the heater off in the event of overhea-
ting. To restart the heater, call the nearest Service center.
6. MAINTENANCE AND SERVICE
Always unplug the heater from the power outlet and allow the
radiator to cool. Wipe radiator with a soft damp cloth; do not use
detergents and abrasives. Should the radiator not be in use over
a certain length of time, roll the cable around the holder and store
it in a dry place.
This appliance has been built to last for many years of trouble-
free service. In case of malfunction or doubt, do not try to repair
the heater by yourself: this might increase the risk of fire and elec-
tric shock. Call nearest Service Center for a complete list of Service
Centers (U.S. Only).
Your product is equipped with a polarized alternating current line plug (a plug having one blade
wider than the other). There is only one way it can be plugged into a power supply. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try again by turning it the
other way. If it would still not go in, it is probably due to an obsolete outlet which should be
replaced. Do not tamper with the plug or outlet to defeat the purpose of this safety mechanism.
4
COMFORTEMP
BUTTON
GREEN
PILOT
LIGHT
